Irrigation system drip irrigation main country of buyer

When they talk aboutdrip irrigation, immediately represent Israel or Spain, but the bulk of purchases come from regions where water is worth its weight in gold - the Middle East, Central Asia, North Africa. In Shandong Lingyao we are often asked: “Why does Uzbekistan buy more than the UAE?” The answer is not in price, but in agriculture: cotton has been grown there for decades on depleted soils, and drip for them is not technology, but survival.

Where and why do major orders arise?

Last year, 60% of orders forirrigation systemsaccounted for Kazakhstan and Uzbekistan. The reason is government programs for the modernization of agriculture. But there is a nuance: local farmers rarely take ready-made kits; they often order designs for specific fields. We at Shandong Linyao Intelligent Agriculture Technology LLC focus on adaptation - for example, for farmers near Tashkent we developed a system with enhanced filtration due to the high silt content in the water.

It’s more difficult with Egypt: they require minimal automation, but maximum maintainability. We had to reconsider the design of the drip tapes - we increased the wall thickness, although this makes the system more expensive. But after three years of operation in hard water conditions, the reviews are positive: there are fewer leaks at the joints.

An interesting case was with a customer from Iraq: he wanted a combined system - drip irrigation for date palms and sprinkling for row spacing. We had to make two independent circuits with a common control unit. The project showed that hybrid solutions are in demand, but require careful pressure calculations.

Mistakes when choosing equipment

Often customers save on filters, considering them a secondary element. In fact, 80% of drip irrigation failures are caused by clogs. This is especially critical in regions with hard water - for example, in Saudi Arabia, without multi-stage filtration, emitters fail within a season.

Another point is the calculation of pressure. In the mountainous regions of Tajikistan, we first installed standard gearboxes, but they could not withstand elevation changes. We had to develop a cascade system with control sensors. By the way, this experience was later useful for projects in Chile.

Automation is a separate topic. Many people think that only large farms need remote control. But for the same Uzbek farmers, remote control via a smartphone has become a decisive argument: they save time on going around the fields.

Practical cases from our portfolio

On the website https://www.lyzhihuinongye.ru we do not describe all projects - some are too specific. For example, for a greenhouse complex in Azerbaijan, they made a system with separate supply of fertilizers: different modes for tomatoes and cucumbers. At first there were malfunctions in the operation of the injectors, but after setting up the pH controller, the problems disappeared.

In Turkmenistan we worked with cotton fields: uniformity of irrigation is critical there. We used tapes with compensated droppers, but we had to increase the pitch of the emitters due to the high mineralization of the water. The result is that water consumption has decreased by 35% compared to traditional irrigation.

The most challenging project is oasis farming in Oman. They combined drip irrigation with solar pumps. The problem was in synchronizing the operation of the pumps and the controller: when the electronics overheated, the settings were lost. We decided to install additional thermal insulation casings.

Technical subtleties that are rarely written about in specifications

The length of the drip irrigation line is not always possible to maintain the standard 100 meters. In the sandy soils of the UAE, we reduced up to 70 meters due to rapid siltation. And in the clayey soils of Jordan, on the contrary, they increased it to 120 meters - but installed additional flushing valves.

Tape material: for markets with high insolation, we recommend UV-stabilized polyethylene. Ordinary black plastic cracks in Egypt in two seasons. This increases cost but reduces replacement frequency.

Water consumption - many manufacturers give average values, but in practice local conditions must be taken into account. In Uzbekistan, for example, nighttime air humidity makes it possible to reduce consumption by 15-20% without damage to plants.

Prospects for technology development

Now the main trend is integration with weather stations. But in reality, farmers from the same Uzbek villages rarely use this data. It turned out to be easier to implement soil moisture sensors with SMS notifications - the technology is simpler, but gives an immediate effect.

Interest indrip irrigationgrows in Eastern Europe - especially in viticulture. There the requirements are different: not so much saving water as precise dosage of fertilizers. We are testing systems with separate lines for water and nutrient solutions.

The future lies in modular solutions. This is exactly what our team at Shandong Lingyao LLC is working on: we are creating systems where a farmer can start with a basic kit and gradually add automation. The first tests in Kazakhstan showed that this approach reduces the entry threshold by 40%.

What is important to understand when working with different regions

Climatic features - not only temperature, but also wind load. In the steppe regions of Kazakhstan, tapes are often damaged not due to wear, but due to rubble raised by the wind. We had to develop protective covers.

Local standards: Turkey, for example, requires certification to local standards, which lengthens the implementation process. But after receiving the certificate, access to government tenders opens.

Cultural sensitivities: In some Gulf countries, white equipment is preferred because they believe it produces less heat. We have to go to a meeting, although there is no technological difference.

In the endbuyer's main countrydetermined not only by economic factors, but also by readiness for technology. Some people still consider drip irrigation a luxury, while others are already moving to the second generation of systems. We at Shandong Lingyao continue to adapt solutions to specific conditions: sometimes the simplest modernized filter is more important than complex automation.